| Title |
Image |
|
Bolt glassbeading
( Click image to enlarge ) |
 |
Fender clips blasted
( Click image to enlarge ) |
 |
Fender bolts restored
( Click image to enlarge ) |
 |
Fender bolts and washers media blasted
( Click image to enlarge ) |
 |
Fender hardware prior to glass beading
( Click image to enlarge ) |
 |
Left fender installed for bodywork
( Click image to enlarge ) |
 |
Front left side view
( Click image to enlarge ) |
 |
Fender, Door and cowl gaps
( Click image to enlarge ) |
 |
Gaps all look fairly decent
( Click image to enlarge ) |
 |
Door hinge bolts before media blasting
( Click image to enlarge ) |
 |
Fender bolts blasted and ready
( Click image to enlarge ) |
 |
Hinge to door bolts right side
( Click image to enlarge ) |
 |
Blocking to install door
( Click image to enlarge ) |
 |
Making door installation easy
( Click image to enlarge ) |
 |
Hinges restored with new bushings and pins
( Click image to enlarge ) |
 |
Door needs to be raised for alignment
( Click image to enlarge ) |
 |
Alignment after adjustment
( Click image to enlarge ) |
 |
Blocking to help alignment issues
( Click image to enlarge ) |
 |
Gaps after adjustments
( Click image to enlarge ) |
 |
Close but not quite there yet
( Click image to enlarge ) |
 |
Starting to look like a car again
( Click image to enlarge ) |
 |
Right front section of fender after stripping
( Click image to enlarge ) |
 |
Fender after stripping
( Click image to enlarge ) |
 |
Lower dog leg of right fender
( Click image to enlarge ) |
 |
Inside of right fender
( Click image to enlarge ) |
 |
Inside right fender front section
( Click image to enlarge ) |
 |
Hood before stripping
( Click image to enlarge ) |
 |
Hood with multiple paint layers
( Click image to enlarge ) |
 |
Ready to be stripped
( Click image to enlarge ) |
 |
First layer of stripper working
( Click image to enlarge ) |
 |
After scraping first layer
( Click image to enlarge ) |
 |
After second coat of stripper removed
( Click image to enlarge ) |
 |
One side ready for the DA
( Click image to enlarge ) |
 |
Scoop area needs to be blasted
( Click image to enlarge ) |
 |
Half of hood almost finished
( Click image to enlarge ) |
 |
